All in One Temperature & Bridging Tower - 30º and 45º angle test

This tower allows you to test different temperatures in your printer!

You can test 30º and 45º angles, bridging and curvature.

You can use the PETG designed tower to test PETG, or the blank one to test any material.

Printing a temperature tower is very easy to setup in PrusaSlicer. Just add the STL and slice as usual. Then add a custom G-code in every temperature-changing layer by right-clicking the “+” button:

Finally set the desired temperature as in the picture below (where “240” is your desired temperature):

Easier than you thought, right? Happy printing!