Pincushion for Mercury 2 Plus turntable

I made a "pincushion" for the Mercury wash/cure station.  I did it to address the times when I wanted to position a model on the turntable in some other orientation than laying flat.  

I had a number of mild steel wires (probably florist wire?) with a 1mm diameter.  I made a plate to mimic the turntable stage.  It has 3mm cap head screws on the bottom to engage the curing station drive holes & a couple of washers glued into depressions (26x2.8mm) for the magnets to grab.  The top side has an array of 1.5mm holes.  I can place wires in the holes & bend to get the type of support I want for those times when flat just won't do as well as something else.