Ambigram Text Clip on your I3MK4S Frame

Accessorize your I3MK4S' frame with this clamp and text together. You add custom text by combing the models in your slicer. 

Print on it's back with supports, do not use “tree/natural” supports, they are harder to remove from the print. The letters will be small, and if the supports stick to the model removing them may also remove the letters.  

The steps for custom text is simple!

1. Create the text on OpenSCAD and export to STL. 
2. Import your custom text and the “bare clamp” into your slicer of choice.
3. Join them together and print. 

Import the mesh from OpenSCAD and move the text to the top of the clamp. Then merge the models in your Slicer. 

In-lieu of installing OpenSCAD, you can use the web version of OpenSCAD to render and export the mesh of your choice, and add it to the clip. This may have font issues, but it worked for me. 

Arrange in your Slicer:

1. Import both models. 
2. Place the clip with it's “back” on the bed. Do not adjust the scale of the clip.
3. Adjust the scale of the text to match the length of the clip. If it is too small the print will fail. 
4. Rotate the text to match the “top” of the clip
5. Move the text to the “top” of the clip.
6. Merge both models in your slicer.
7. Raise the text to be centered on the clip. 
8. And Print!

Used @Lyl3 "Dual Letter Blocks Illusion Customizer" (CC-BY-SA) OpenSCAD file to make the text, and merged it a cut version of the model from  @YTMA_1676212's “Humidity and Temperature Sensor Adapter / Holder / Mount - for "Printer Frame" Prusa MK4S” (CC-BY).