Ingenic A1 NVR Case (new board)

It's a development of a legacy model fitted to new PCB and ports layout.

I include two cutouts that will let you fit-test the board without spending much time and plastic on printing the full model.

To mount the NVR board to the bottom part, you will need 3 pcs of brass thread knurled nuts M3x3x4.5 and 3 pcs of M3 bolts. Use 4mm wide plastic zip tie to hold SSD in place. To attach top to bottom use 4 pcs of brass thread knurled nuts M2.5x4x3.5 and 4 pcs of M2.5 bolts.