T-Slot M10 Single Bolt Loop Anchor

Designed with Markforged CCF inlay in mind.

Meant to be mounted with one M10x20mm socket head bolt and a square M10 nut. 

WARNING: The wrong materials will make this a very dangerous loop for cargo loading when it fails. If used on a cargo rack, temperature and sunlight will degrade any material used. DO NOT print and use this in weak materials. USE AT YOUR OWN RISK if at all!

I am printing in Markforged Onyx with multiple layers of multiple loops of embedded carbon fiber. Even with all that, it's still just for testing at this point.. 

The fastener parts I'm using:

• M10-1.5 x 20mm Socket Head Cap Screws
  • https://www.amazon.com/dp/B08BTX28VZ
• M10 Square Nuts
  • https://www.amazon.com/dp/B0CNRK6CBQ
• T-Slot Nut Spacer Shim
  • https://www.printables.com/model/1358186-t-slot-nut-spacer-shim