Ender5+ Electronics Case

UPDATE 16/01/2022

Added BOM for electronix case.

I'm not going to be doing a manual as it's self explainatory with the photos.

Acrylic panels an associated mounts also included. Stl files uploaded for these aswell.

Optional handle can be mounted on the rear panel if required.

Uploaded new top enclosure panels that include holes for USB and LAN panel mount connections for when an internal enclosure CAM or an ADXL345 (LAN) requires a quick internal connections.

UPDATE 10/01/2022

Added the printable BK-BK JST Connector Mount.

Solder two 2p PCB JST male jacks pcb ends together. One is to be upside down.

Slide the soldered pair into the hole of the printed panel mount. Makes for a better connection on the rear face (inside the case).

UPDATE 07/12/2021

Nolonger a work in progress. All parts uploaded are fitted to my printer and working as intended. I recommend that you measure youre printers frame to confirm all dimensions before commiting to printing parts and ordering panels. I will not held responsible if this does not fit your printer as it does mine...all printers have slight differences in dimensions.

The aluminium panel can be acrylic if you want too. Just do not put too much pressure on any of the mounting screws around the perimeter.

The BOM is underway.

UPDATE 16/11/2021

To BOM or Not to BOM?

Uploaded new main stl file, individual stl's, a stp file and the aluminium panel plan.

The two fans are quiet enough not to swap them out for Noctua type fans, you can hear them but they are not offensively loud.

All the DIN mounts will be uploaded to a separate model as they are Voron remixes.

UPDATE 11/11/2021

Some more photos of how it looks.

Currently waiting on right angle usb cable from RPI to MCU to have the electronics case completed. The two 4010 fans directly blowing across the mcu works a treat and I can feel the air flow through the vents on the other side with the acrylic panel fitted. May need to change them to Noctua fans or maybe install the SKR2.0 I have to actually control the fans when required.

UPDATE 10/11/2021

Before and after shots added. Still not quite completed but how it's turning out I'm very happy with it.

Another design teaser... Ender 5 Plus Electronics Case

Design Requirements

No.1 keep as compact as possible trying not exceed the printers stock dimensions.

No.2 design to be used with my corexy conversion system.

I decided to move the Ender5plus's electronics to the rear of the machine... I have had my printer like this for some time now using an aluminium panel on the rear with all the electronics hanging out back but I wanted to make it safer and more compact, so I have kept the fundamentals of the design, but moved it within the existing stock frame.

I have designed it in combination of my ender5plus corexy conversion.

Utilizing a new waterjet cut aluminium panel that fits within the channels of additional 2020 extrusions and within the rear of the stock frame I have all the electronics mounted on two DIN rails.

All stl's will be uploaded once I have put it all together to confirm the design is working and houses the electronics as designed.

At this point I'm not sure about a BOM but if there's enough interest I'll see what I can do.

BTW... I am currently designing a top enclosure with hinged lid... that will definitely not work with steppers hanging off the rear and inverted (IMO a clumsy non-compact design).

Works for me.

Please consider a donation to help support my designs.
PayPal.Me/RedWhere2020