Curved Camera Slide

A curved manually operated monor rail camera slide to take those simple rotating motion shots. No power, no electronics, just a finger required.

Based on the 2020 extrusion using v-slot pom wheels.

Its radius is approx 300mm with a curved length of approx 600mm or an approx 60° angle and holds a phone. With another print it could hold any camera.

Tracks printer on an Ender 5 plus, all other parts printed on an Ender 3v2 with no supports.

Basic BOM:

• M5 x 25mm SHCS for most fixings with nuts

• M5 x 25mm SH counter sunk screws for joints

• M3 and M5 x 40mm for the hinge axles.

• M3 x 10mm SH counter sunk screws

• M3 x 4.5Ø x5mm heated brass inserts

Works for me!

Dont print the phone holder 'T' track mount 3...I'm missed a couple of holes print Track mount 3.1 as this has the holes required.

Category: Camera