8mm dowel drill jig

I was annoyed by the dowel jig/drill helpers I had. So I constructed those two little helpers. To make sure the drill bit will be used in 90 degree angle I used basic 8mmx22mmx7mm ball bearings (two per hole) as the lead. The surface without the brackets is 57x37mm.

You can either use the side with the brackets or rotate the jig to use it on big flat surfaces. Please keep in mind that if you use them in this position: use the facing borders (without the bracket) for the orientation because the brackets add 2mm. Otherwise the holes on the two parts will differ by 2mm. (see pictures "usage_1" and "usage_2")

Print Settings

Printer:

Anycubic I3 Mega

Rafts:

Supports:

No

Resolution:

Infill:

10

Category: Tool Holders & Boxes