3/4" 90deg BULLNOSE MITER MARKING TOOL

This tool is for marking the miter for a 90 deg 3/4" bullnose drywall edge.

The tool will mark right hand or left hand miters as needed.

There are two versions. One with relieved corners and the other without, so you can cut excess corner material as you like it.

I used Prusament PLA 215/60 temp settings, .30 mm layers, set in draft mode for speed.

You may want to add a brim of 3-4 loops, one layer high, zero offset from part to help with adhesion if you are having trouble. I did not it with a Prusa i3 MK3s. Print time about 1hr 20 min.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.3mm

Infill:

Filament: Prusa PLA white

Category: Hand Tools