August 12, 2025
Description
This is a 10" rackmade from 2020 T-slot aluminium profiles.This rack doesn't fully comply with the 10" "standard", the screw spacing is slightly wider, some panels might not fit. Check measures before commiting. Some parts are too big for a normal printer, laser cutting or manually cutting a sheet material could be an option but i don't have any templates yet. 1U panels fit on my prusa if i put them diagonally on the bed.
Non-printables needed: 4x 500 mm 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole (see 2020_profile_prep.pdf for details). 4x 300 mm 2020 4x 263 mm 2020 36x Screw M5 x 6 mm (side panel) 6x Screw M5 x 8 mm (edge bottom) 8x Screw M5 x 16 mm (feet) 16x Screw M6 x 12 mm ISO/DIN 7380 (frame) 38x Hammer nut M5 (feet, edge bottom, side panel) 104x T-nut M5 10mm long (printed ones can be used on Y-profiles, so a 100-pack is enough)
Printed parts needed: 52x T-filler-spacer 46x T-filler-gap (tip: print in contrasting color) 4x T-filler-Y 4x T-filler-Z-Bottom 4x T-filler-Z-Top 2x Edge-Bottom 4x Feet (preferrably flexible material) 1x Bottom-Panel 4x Side-panel (multi color print, can be done with filament swap) 6x Panel_Connector 4x End cap (later addition, doesn't show in all pics or assmbly instructions, a little bit fiddly to get on but then it sits pretty well)
Designed with Onshape: https://cad.onshape.com/documents/cfaff7d668f372680f9a7141/w/f9a1ee6326de62472cfeb937/e/6fd48cd1caf171ba663101f4?configuration=default&renderMode=0&uiState=688f558fd5b2bf27821fd1e8
2025-07-28
Added an end cap for the 2020, to cover the ends of the handle parts.
2025-08-03
Published link to Onshape.
License:
Creative Commons — Attribution — Share Alike
Ornotermes
