Battlefield - Tracer Dart Gun

This is a model of the tracer dart gun from the battlefield series of games, in my opinion is one of the most fun a unique gadgets in the series and it has end up looking great, this model its A1 mini compatible it doesn't require AMS but it benefices a bit of having the bigger bed size and multi color.

It first appeared in battlefield bad company and since them it has appeared in bad company 2 and 2042, the design in both bad company is the same but in 2042 it suffered a small residing but the profile is keep petty much the same ,the redesign put it in more in line with the 2042 ascetics (of which I am not the biggest fan), but the original model is petty old so i took details from both models, but like i said they are petty similar.

It has been leaked that its going to appear in battlefield 6 , but it seems it might have gotten a bigger redesign but the icon it keep the same so how knows about how it might look , i personally like more original design.

For assembly:

All you are going to need its superglue , wire cutters and some cuts of filament.

A couple of details are going to be optional since they are kinda tricky to add and they dont change a lot of the final result but since they are details the original model had i wanted to add them , this are the botton that goes in the back of the trigger and cable that goes in the middle.

Lets start with the grip, you can just slide in the two “reciver” parts and the lower part of the grip.

Now we can also slide the back sight, you must also add a couple of strings of filament in the holes , if they are red or green is better, just insert them and cut the parts that stay outside.

Opcional

We wrap the round thing around the grip and then glue the button joining the two parts, adding glue so this part doesn't jumps around can be tricky but you dont need to add much.

Now we can add the trigger guard helping ourselves with two string of filament to use as guides. 

Now we can glue the barrel.

Note: If you have a A1 mini first glue the two parts of the barrel, just try to align them as much as possible, dont worry too much about the seam as its going to be hidden.

Opcional

If we want now its the moment to add the cable that is going to be a string of filament, 170mm for now we can cut the excess latter.

Optional

We can also slide in this round thing to help guide the cable.

Slide and glue the gas bottle.

Now we can slide this part over the barrel and bottle, this part has a hole in the middle for the cable.

For the final part we must add the front sight assembly and the laser module, if you have decided to add the cable this is going to be the trickiest part since you have to cut the rest of the cable to the right size, the laser has a small hole in the back to insert the cable, there is going to be a bit of trial and error to get the right length but its not too hard, and that is going to be it.

If you have some doubts or recommendations for new projects you can leave them in the comments, i hope you enjoy making this model in the time between BF6 betas.