Peloton Bike+ Towel Hook

This is a towel hook made for the Peloton Bike+, an indoor exercise bike. The model hangs on the frame between the handlebars and the screen, leaving a convenient location to store a towel. This way, the towel is always available when you are riding the bike.

Unfortunately, this design will NOT work with the original Peloton Bike. The original Bike appears to have a different frame design. However, if you own one and want a towel hook design, feel free to send some measurements of the frame and I can try to design something that will work.

Best of luck printing, and I hope you find this model useful!

Printing

This part should fit well onto the bike's frame, allowing it to last a while. However, I would recommend at least 3-4 walls and 20% infill, since the part could wear down over time with consistent use. With similar settings, so far I have not had this design break on me.

License

This is shared under the CC BY 4.0 license, meaning you can share, adapt, and sell copies of this design as long as you give proper attribution. This requires you to include the name of the creator (Ethan Bayer), a license notice, a link to the original material, and, optionally, the title.

Example

“Peloton Bike+ Towel Hook” (www.printables.com/model/1383035-peloton-bike-towel-hook) is designed by Ethan Bayer and shared under a Creative Commons Attribution (CC BY 4.0) license (creativecommons.org/licenses/by/4.0).