CRJ Series Bose A20 / A30 headset controller holders

Keeps those pesky control bricks off your lap and out of the way while you're flying! (CRJ series)

Variations include the A20 and A30 series controllers and hooks to go over the side of the cubby, either on CA or FO side, (both work) while you're flying. Also conveniently fits between the screws on the side of the cubby - keeping the controllers in a relatively consistent position.

Models have been tested with some at my airline, but feedback is appreciated for future improvements to the design. Also working on future variations for lightspeed and DC headsets.

For heat/warp resistance purposes, print using PLA with 3+ walls / 25%+ infill or use PETG. 

I have had the most success printing these models upside-down and supporting the overhang with tree supports.

These models are not entirely my creation, but I am unable to find my original source files that came from GA designs. These designs adapting the controller mounts to the CRJ are my own - please do not sell them without permission.

I originally planned to distribute these myself within my own regional airline/on eBay, but after searching the internet found several paid variations for the CRJ - here's a free model for personal use! 

-Zach