March 29, 2026
Description
BEARINGS:
SCREWS (I used dome head):
NUTS:
Â
| PRINTING SETTINGS | |
|---|---|
| Infill | 40 - 100 (more = stronger) |
| Outlines | 3 - 4 |
| Layer height | 0.2 (for smother look), or higher for faster prints |
| Brimm | Only if needed (012, 017) |
| Supports | Only if needed (004, 005, 006, 007, 010, 011, 012, 016, 017) |
3mf files are saved with print settings such as orientation, supports and brimms.
I recommend lubricating the moving parts where they come into contact, especially the gears.
Nozzle adapter allows the insertion of a 50mm diameter pipe and at the same time fastens the turbine housing.
M5 screw must be screwed into the crank with force.
M3x30-40 screw must be screwed in with force through the impeller into output_sun_gear after the top of the case with 608 bearing and turbine case (part A) is fitted.
The clearances are designed to be fitted with a tight fit to ensure durability and accuracy, so putting parts in place will often require some force, especially the placement of bearings.
License:
Commercial Use
Shutter
