Indoor temperature, humidity, pressure sensor

How to use

The device measures temperature, humidity and pressure and sends data to the server for analysis. 

This software can be adjusted to the needs: LaskaKit/Weather_Station_Mini

Bill of materials

Manufacturing instructions:

• Material: PLA
• 3D Printer: FDM 3D printer, average print time 4 hours
• Slicer settings: 0.2mm layer height, 5 perimeters, no supports
• Post processing instructions:
  • Insert the battery, use the double sided adhesive tape to fix.
  • Insert the ESP32 board and connect to the battery.
  • Run the BME280 sensor cable through the space in between the chambers and connect the BME280 sensor.
  • Use M2,5 bolts to attach the board and sensor.
  • Cover the electronics with the lid and tighten with two M3 bolts.
  • Place on the shelf, table or other horizontal surface oriented as shown on the lid.
  • Flash the software and flash.