ESPSomfy RTS case

This case is designed to be used for the ESPSomfy RTS controller and is compatible with the following components:

Important:

• The tall case (espsomfy-rts_case_tall) is for when you want to use 2.54 pin connectors (also called Dupont connectors).
• The opening on the lid should be towards the Wi-Fi antenna.
• Depending on the dimensional accuracy for your printer, the pin that holds down the transceiver could have a varying fit. You might need to print some iterations with different scaling factor before it's correct.
• I recommend a dab of glue to the ESP32 and transceiver pin to hold it in place.