Gridfinity base plate for Arebos workshop trolley

Gridfinity base plate for Arebos workshop trolley drawers for up to 2 layers of my  Gridfinity boxes =)

The boxes fit well to the drawer in a 6x12 base plate grid and allow to stack even a 2nd layer of boxes on top of the first layer. So you gain a ton of storage per drawer…

The grid come in 6 small pieces to be able to print even on smaller printers. The single pieces are labeled:

• TL = Top Left
• TM = Top Middle
• TR = Top Right
• BL = Bottom Left
• BM = Bottom Middle
• BR = Bottom Right

Here are some pictures: 

Notes:

• The used Gridfinity boxes can be found here: Gridfinity boxes
• The trolley comes with some huge wheels. If you want a solution for smaller ones, have a look here: Workshop trolley smaller wheels adapter plate
• Important to know: These trolleys are really good for the amount of money that they cost. I am really happy with them. I first wanted to buy other ones that were 7x the price of these trolleys here... But one thing I need to mention for you as possible user: I learned it the hard way, when filling the drawers and sorting boxes with screws which tend to be quite heavy, when you have lots of them. In my eyes and experience from the use case here shown, you should open !!! 1 !!! drawer at once only. I was sorting a few boxes from one drawer to the next one under it , so opened 2 drawers and the trolley began to tip over to me…  I was lucky and could press it back down, but it was close to tip over fully. When you think of it, it is totally clear, because of the weight, but I just wanted to let you know, to avoid this experience for you. =)

Printing instructions:

• 0.28 draft profile
• No brim
• No supports

Happy printing =)