Edward Elric FMA - Hueforge

Edward Elric

Print Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Filaments used: Bambu Matte Charcoal Black, Bambu Matte Ivory White, Bambu Basic PLA Red.
Model Size: 100x200
(If resizing, do not change Z height)

Swap:

1. Start with Charcoal
2. at layer #15 (1.28mm) swap to Ivory White
3. at layer #26 (2.16mm) swap to Red for the rest.