VXE R1 fingertip mod WIP

My first attempt of a custom fingertip mouse. Ive since switched to vxe mad r.
https://www.printables.com/model/1385951-vxe-mad-r-fingertip-mod

BOM

mouse (R1 black) https://www.aliexpress.com/item/1005007247038480.html

dot skates https://www.aliexpress.com/item/1005005617841428.html

double sided tape for the battery https://www.aliexpress.com/item/1005006926453576.html

grip tape https://www.aliexpress.com/item/1005005883765116.html

• You might be able to cut it out of the included grip tape.

Print settings

Ive included a .3mf file with my preffered print settings.

Material: PLA/PETG/ABS/ASA (ASA gives the lowest weight)

Layer height: 0.12 mm

Wall loops: 2

Wall generator: Arachne

Infill: 1%

Support: Tree (manual) - Paint it only on the underside of the mouse buttons, the rest can be bridged

Assembly instructions

1.Disassemble the mouse and remove the battery, PCB and the scroll wheel

2. Print the body

3. Carefully remove the supports

4. Snap off these parts using pliers to get clean contacts for the buttons

5. Slide in the pcb and screw it in

6. Test the fit, buttons and overall if you like it and proceed if you do :)

7. Stick the battery on the sensor using the double sided tape (you might need to use more layers)

7. Stick on 4 dot skates under the 2 buttons, thumb and pinky

8. Cut out grip tape using the guides (index and middle finger use the same)

9. Stick on the grip tape