Bike Lock Holder

The child is constantly losing track of the bike lock, so now it has a home on the bike itself.

The “mounting claw” slides into the slot, then is captured by internal pins and the top lip. In theory it can't just rattle loose; time will tell.

I'm not sure if the “mounting claw” is of any standard, so YMMV.

Part is modeled to be printed“upside-down” to eliminate weird overhangs.

Printed in PETG for outside weather/temperature resistance.

Mounted using zip-ties and a piece of an old innertube. 

Technical Notes:

• 17 mm radius bicycle tube
• bike lock attachment rough measurements,
  • 14 mm width
  • 21 mm long
• zip-tie hole clearance: 4 mm × 1.5 mm