Bike Water Bottle Holder Strong, Fast Print, and Versatile

Introduction:

Hoop / ring-style bottle holder designed to flex and securely grip a wide range of bottles and beverage containers (approx. 70 mm to 100 mm in diameter). The independent rings adjust to hold tapered containers just as firmly. Compact at 145 mm overall length, yet versatile and lightweight at just under 30g.

Print Settings:

•     Nozzle: 0.4 mm
•     Layer Height: 0.28 mm
•     Supports: No
•     Material: PETG
•     Infill: 15% Gyroid
•     Perimeters: 4

Assembly:

I placed the angled side of the hoops / rings to face where a bottle will enter to make it easier to expand the rings. Uses the M5 mounting bolts to hold the assembly together. May need longer bolts as I increased the height by 2 mm depending on your setup.

Change Log:

•     v1.0 - 08/18/2025
  • Initial Release