Airtekk Air Suspension Controller (Dash Mount)

I was inspired to make this when a friend recently expressed a need to mount his airtekk air controller in his LS400. So I made this kit to accommodate him, and I liked the design so much, I decide to post it up here. 

There are several different mounting systems, including a short and tall swivel mount, and a hingless dash mount with a either a 45 or 30 degree angle. 

The tray is printed in abs at 15% infill, the mounts are printed in abs at 45% infill. I'd recommend using ABS, ASA, PETG-CF or PET-CF. 

The hardware for this model are: 18x 8x3mm round magnets

If you decide to use the swivel, it utilizes 1x M3x12mm bolt with nut & washer. 

Link for magnets: https://www.amazon.com/dp/B0B2PJV38X?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2