Enclosure bushing with 60mm fan for 2 inch / 50mm hose (Ikea-Lack)

Enclosure bushing for Ikea-Lack enclosure with 3mm acrylic glass panes. A 60mm fan for better Raspberry Pi and Einsy ventilation can be installed. 

Helps to extract odors from the enclosure and remove them using an optional 50mm suction hose. 

See https://www.prusaprinters.org/de/prints/138790-prusa-mk3s-einsy-raspberry-pi-4b3b-enclosure-with-

Instructions:

• use a 55 to 56 mm hole saw
• 60mm fan
• optional: 50mm / 2inch hose 

What you need:

• optional 60mm fan
• optional 50mm / 2 inch suction hose for exhaust air

Print instructions

• Use PETG, ASA or any outer favorite Material
• 0.2mm Layer 
• no supports needed
• 6mm Brim for fan-part (especially with ASA)