Prusa CORE One Swing Arm Left Cable/PTFE Bracket with rubber buffer

Prusa CORE One Left Swing Arm Cable/PTFE Bracket with self adhesive rubber buffer for noise reduction.

This improvement belongs mainly to the users of the swing arm brackets.

When the Nextruder is moving along the Y-axis, the swing arm sometimes touches the back wall, causing a noise. If you dont like this hitting noise, use the bracket with the bumper at the left swing arm position.

The rubber buffer sits in a small frame so that it does not drop out when printing with a heated chamber.

You need one 8x3mm self-adhesive rubber buffer (sample)

Printing recommendation:

Filament PETG, 0.4 Nozzle, 0.2mm Structural, 100% Infill, no supports

Assembling:

Attach the rubber buffer to the backside of the bracket, see picture below:

For more information, have a look at the original model.