MDD Direct Drive Clone Hero Me Ender 3 Gantry Plate

Backstory

I purchased one of the cheaper knockoff MDD v1.2 (Modular Direct Drive) plates and was unhappy when I found that the holes for the gantry plate were not aligning. Therefore I remixed the original gantry plate adapter (PM_CR-Ender_OEM-MS_Gantry_Adapter_5A) from the HMG6 to fit the two threaded holes in the MDD plate. 

The relative positions of nozzle and ABL mount as well as their heights are unchanged. I slightly modified the spacer for the hotend to make room for better air flow from the hotend cooler. 

Models

I uploaded two versions, one with chamfers and one without. I always like to have rounded corners, since the printers are unable to print right angles anyway. However, if you don't like it use the _NoChamfer version.

Printing:

• No supports required
• Infill: 35-50% 
• Walls: 4

If you have questions or like this print, consider leaving a like, comment or a make. Thank you!