June 11, 2026
Description
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off.
However this part has a slightly larger opening as the original.
My print settings:
Material: PETG, PLA is not recommended.
Layer: 0,20mm
Infill: 15%
Perimeter: 4 (would be the most stable option, less would work maybe)
The profiles on my chairs are 40.5x12.5mm
License:
Creative Commons — Attribution — Noncommercial
Thomas
