Formula ZERO: Concept to 3D Model

This is my 3D model interpretation of Vadim Motov's Formula Zero Stealth-Tech concept design.

Printing:

I would recommend that FDM printers print the length at 6+ inches or so; 8 inches would be better. If it is printed any smaller, some of the pieces do not print as they are too small. 
I printed mine at a 40-ish degree angle at 0.15 layer height for best top surface quality. This model might be better suited for resin printing, not sure, as I do not own one.

Supports are needed.

Credit:

Vadim Motov's page: https://www.vadim-motov.com/projects/BV5el?album_id=2907350