August 25, 2025
Description
Cute keychain looking like a realistic pumpkin. Easy print and assembly. No supports are required.
Print the pumpkin itself in an orange color. Print the stem in a green color.
Enjoy printing this object.
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer height
Infill:
10 %
Printed parts and a thread
Assembly part 1
After printing you should have the two halves of the pumpkin and the stem. A thread is required.
Assembly part 2
Fiddle the thread through the hole as shown on the picture. It should form a loop.
Assembly part 3
Add a knot and cut the excess thread. Make sure you are happy with the size of the loop.
Assembly part 4
Add glue to the knot to prevent it from opening once trapped inside the pumpkin. Add glue to the lower part of the stem and the contact surface of the two halves. Put everything together. Wait till the glue is dry.
License:
Creative Commons — Attribution — Noncommercial
Dreamtime24
