Indicator Mounts for bicycles

Mounts for front and rear indicators on a bicycle, should work wit most motorcycle indicators using M8 mounting bolts. 

The rear mount is made to be cut with M5 Treads on the fixing surface to the rear light mount (of the bike/luggage rack). The rear light will be mounted on the back using the two provided holes, its fit for mine (Sigma EOX RL) tho the spacing (50mm) should also work for others. I would recommend printing the narrower version, since the wide one is pretty much around the width of fully stuffed saddle bags and i managed to get my leg caught a couple times on it, breaking it in the process.

The front mounts are made to fit into the sides of one of the cheap accessory tubes for mounting on the bike handlebar. here the Light is supposed to tread directly into the part, utilizing the print-in treads, so a well adjusted printer is recommended. They are supposed to fit in snugly, tho depending on the tolerance it might make sense to glue them in place. The long variant is to meet legal minimum distances with the 20cm tube in Germany with a 30cm tube or elsewhere the short ones should be fine.