Insta360 Ace PRO 2 Case

Innerside was edited to fit the camera without pushing a button, the wind guard and 1x USB-stick. I also added an innerside for the top to prevent that the things fall out if the box is upside-down. If you print it with TPU (as I did) you also won't scratch your camera.

Print settings:

Insta360 ace pro 2 top/bottom

• PLA
• 0.2 Layer height
• 5% Infill

Insta360 ace pro 2 clamp/internal top/internal bottom

• TPU A95
• 0.16 Layer height
• 5% Infill