Xtool F1 HEPA Unit

HEPA AIR UNIT - for XTOOL F1 

This is a simple design to keep some HEPA air filters on the exhaust of the F1 while its running. 

This is a solution I came up with because the F1 sits in between two of my 3d printers, and I didn't want to have to run a house around to an air unit, not to mention pay for an air unit. I included a shroud portion that can fit a 120x25mm 12v or 24v fan for some extra suck. I also included a house adapter piece. 

If you plan to print this design, you will need 

2 - 80x40x15mm HEPA Filters 

(depending on which design you go with) 

with fan shroud - 16 - 8x2mm magnets

without fan shroud - 8 - 8x2mm magnets

AMAZON LINKS

Magnets - 

https://www.amazon.com/dp/B0DD78JPBB?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

HEPA Filters - 

https://www.amazon.com/dp/B0782T7L6P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1