Polaris Xpedition Rotary Switch Plate

Made this for use with the Berks Attachments rotary knob for their wiper delay kit for the Polaris Xpedition.  I tried to use one of the blank plates already in the dash , but they were too flimsy.

Printed in Bambu PETG-HF at .18 layer height, 15% infill and 4 walls

Inner diameter of the hole for the switch comes out to right around ~8mm.  The plate fits snugly into the dash and the rotary switch helps retain it in the dash since the body of the switch is wider than the hole in the dash.