Gridfinity 1x1 Bins – Snap Lid

This is a bin compatible with ZackFreedman’s Gridfinity. Designs are available for both vase mode printing and solid printing.

Notes:

• The minimum vase mode printing settings use a 0.4 mm nozzle with an outer wall width of 0.6 mm. In my tests, using a 0.6 mm nozzle with an outer wall width of 0.8 mm provides sufficient strength.
• In vase mode, the fit can vary significantly depending on the outer wall width, and if it exceeds 0.9 mm the lid may become too tight and difficult to remove. By comparison, lids printed as solid prints have a consistent fit.