Sparkmaker Resin Bottle Pouring Spout with Lid

This pour spout screws to the top of Sparkmaker resin bottles and has a drip-catching design so you can shake the bottle, let the resin drain back, and fill the vat without getting resin everywhere.

The base screws onto the bottle and has a taper that seals against the inside lip of the bottle. It should be screwed down fairly lightly.

The lid should screw and unscrew relatively easily - although it takes a few tries to deburr it so it is smooth

Print Settings

Printer:

Dremel 3D40

Rafts:

Supports:

No

Resolution:

Infill:

20%

Filament:

Dremel PLA

doesn't matter

Category: 3D Printer Accessories