KRE!ERE Screwdriver - refresh your Parkside tools!

🛠 3D Printable Tools – Created to create

This is a 3D-printable tool, designed for refreshing Parkside tools design, for repairability and ease of assembly. Compatible with Parkside screwdriver components: 

https://www.lidl.de/p/parkside-4v-akkuschrauber-pas-4-d7-mit-akku-und-ladekabel/p100392050#searchTrackingMasterId=Product.100392050&searchTrackingTitle=4V+Akkuschrauber+%C2%BBPAS+4+D7%C2%AB,+mit+Akku+und+Ladekabel&searchTrackingPageSize=48&searchTrackingPage=1&searchTrackingEvent=click&searchTrackingId=Product.100392050&searchTrackingQuery=PAS%20D7&searchTrackingOrigPos=1&searchTrackingPos=1&searchTrackingOrigPageSize=48&searchTrackingChannel=DE&list=search
 

The model consists of multiple parts that can be printed separately and then easily assembled.
Assembly requires no additional screws or glue – everything fits together using Parkside screwdriver parts

⚙ Printing Instructions

Ready-to-use .3mf files with settings for Prusa and Bambu Lab slicers can be found in the “Files” section

General print setup:

• Layer height: 0.2 mm (standard quality)
• Line width: 0.5 mm
• Infill angle: 0°
• Supports: disabled

 Front & Back parts

• Material: PETG or ABS (for strength & heat resistance)
• Walls: 3 perimeters
• Top/Bottom layers: 0 (use infill only)
• Infill: 100% Aligned rectilinear

Extra note for Translucent PETG: reduce Sparse infill speed to 50 mm/s for for better transparency

Rubber part 01 & 02 (OPTIONAL if you want it in the colors you want)

• Material: TPU (or other flexible filament)
• Pattern: Concentric for top & bottom layers

 Buttons (Main button, Main button part, Side button)

• Material: Any filament (PLA, PETG, ABS – your choice)
• Recommended to print with at least 20% infill

🎥 Assembly Guide

A step-by-step video tutorial is available to help you assemble the tool 

Let's make personalized and aesthetic tools possible, by your support and feedback. Thank you!