Leafy Infill Bowl

I wanted to create a design that didn't involved multicolours so I decided to have a play with using infill to create contrast.

This is my Leafy Infill Bowl, I used 30% gyroid infill on the bowl (with no walls or top and bottom layers) and I set the leaves infill to 100% to make them stand out.

You can experiment with different infills and percentages but I would keep the infill above 20% to make sure the bowl is stable.

I have attached the stls and a Bambu Studio 3mf, if you need a hand with slicing or would like a different 3mf, give me a shout.