September 14, 2025
Description
These cases are meant to be printed using flexible filament (eg. TPU 95A - 98A).
My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill, see screenshot.
8-30-2025 - Added optional kickstand versions
8-31-2025 - Added “slimfit” versions, where back wall thickness equals sidewall thickness. Camera bar protrudes unprotected, so be wary of that.
9-13-2025 - Added standard vs. rugged versions. Standard versions have 1.5mm sidewalls, Rugged has 2.0mm sidewalls.
9-13-2025 - Added optional grip textured sidewalls. Be sure your printer is well-tuned for this one.
License:
Creative Commons — Attribution
gleonard3
