CYD ESP-32 Case For Battery GPS Mod Kit

A variation of two other CYD housings. 

For Best Results: 
Print in PETG or PLA with 15% infill or higher

Requires: 

• (7) M3x4x4 or M3x5.7x4.6 Heat Press Inserts.
• (4) M3x6 Socket Head Screws.
• (4) M3x12 Socket Head Screws.

Changes Include:

• Expanded housing space to fit 1100mAh battery. 
• Relocated standoffs and mounting screws for GPS + Battery PCB from Hedge Tech.
• Relocated charge port and power switch location. ( Side mount V2)
• Added port for CYD board connection to usb-c access 
• Added border for better screen protection
• Removed stylus hole A variation of two other CYD housings. 

Final Note:

• V3 Is the largest and deepest will fit 1100mAh Battery. 
• V2 Is for small flat battery will NOT fit  1100mAh Battery.
• V1 Is standard layout on switch at bottom will also fit  will fit 1100mAh Battery.