Door Hinge Cover

Simple door hinge cover to hide the slightly oily hinges.

I removed one of the inner doors in the apartment to gain some space behind it for a new furniture. 

The usual hinges are a bit oily and ugly to look at as they stick out in their metal appearance. 

The upper pin is Ø10.5mm and 25mm high and the lower part is Ø16.5mm and 40mm high for reference.

So I made this simple cover that just slides over the hinge and hides these ugly thingies…

I now just need to find a better to the door frame matching filament color to hide them some more… ;-)

Printing instructions:

• 0.2 speed profile 
• Brim set active due to advice in the Prusa Slicer
• No supports
• Textured sheet used
• Optional: Fuzzy skin 
   

Happy printing =)