Front GPU mount for RM23-502-MINI

This bracket requires a Thermaltake PCI-E 4.0 Dual 90 Degree Riser Cable 400mmPCI-E 4.0 Dual 90 Degree Riser Cable 400mm 

• The bracket comes in two halves and is bolted together using a single countersunk m4 bolt (or glued).
• The riser slot pcb can be mounted at a lower or higher position on the bracket. To accommodate 2.x slotted GPUs or provide more under-airflow.
• The bracket can be used with standard 80x25mm fans or 80x15mm fans.

It is recommended to add the riser pcb to the bracket prior to installation into the chassis.
The bracket connects to the chassis via fan screws into the back of the 80mm fans and uses the 80mm fan bracket screws (they can be backed out slightly and tightened again once the bracket is in place - they extended beyond the metal bracket and will clutch into the printed bracket) 

Note: Other 3d printed objects in the photos:

• 4070 Blower fan shroud
• 5.25 double bay fan bracket