GRANO | Desktop bin

GRANO | Desktop bin

Meet GRANO, a simple and stylish desktop bin, with a print-in-place swing lid.

DIMENSIONS | Ø123mm x H179mm

3D PRINT SETTINGS: 
All STL files are already oriented properly. 
No supports or adhesion brim needed.

BIN: 
The 3d model is full and needs to be turned into a shell by cancelling the top faces and the infill.
Resolution: about 0.2mm / layer (I printed with 0.3mm/layer) 
Perimeter walls / wall lines: 3 lines for a 0.4mm nozzle, 2 lines for a 0.6 or 0.8mm nozzle. 
Top face layers: 0 
Infill: 0% 
Bottom face layers: 3 or 4 
Build adhesion type: None 
Supports: None

LID: 
The lid prints upside-down (STL already oriented properly) and needs regular settings with some infill.
Resolution: about 0.2mm / layer (I printed with 0.3mm/layer) 
Perimeter walls / wall lines: 2 
Infill: 20 to 30% 
Build adhesion type: None 
Supports: None