Fresh 'n Rebel Smart Finder holder for Muto E-Bike

This is a small holder that let's you mount your Fresh 'n Rebel Smart finder on a Muto E-Bike. It is mounted under the wooden plate of the Basket Chameleon L rear rack. To install you need to remove the four Allen key screws to get under the plate. You then apply some double athesive tape on the frame to make sure that the holder won't rattle. Put the wooden plate back and your tracker is virtually invisible (see pictures).

I printed it in white PETG and spraypainted it black to match the basket frame color to make it as stealth as possible. You could also print it in black ofcourse.

The Fresh 'n Rebel Smart Finder is sold by Action in the Netherlands and maybe trough some other retailers.

If you are going to use this model I would really like to read about your findings and see your end results, so please take the time to write down your findings and upload your pictures ;).

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts: 

No

Supports: 

Yes

Resolution: 

0.2mm

Infill: 

20%

Filament: JAYO PETG White 
 

Notes: 

Nozzle temp: 235 °C
Bed temp: 75 °C
Support overhangs larger than 70 degrees

Post-Printing =============

Just a little support removal and maybe some little stringing depending on your printer.

Category: Tool Holders & Boxes