Risers for Agility Hex Rings (FPV Whoop Gates)

These hexagon shape rings are common on AZ and make great FPV gates for whoops. To raise them off the ground a bit and stay out of ground effect, these risers are in 25mm (1") and 50mm (2") as well as a connector to connect the pointy ends.

Hex rings used measure 49cm (19") outside, across flats. 11mm (7/16") thick.

Be creative, mix and match, but most important, get out there and whoop!

Print in PETG if using outdoors. Print in Draft (0.3mm layers, 10% grid infill, 2 walls). Print connector on “end” to not need any support.