February 10, 2026
Description
THE MINI AETHER is a mini version of our Aether hypercar.
Total assembly: Roughly 85 x 40 mm
Filament: We used roughly 20 g of filament using 5% infill.
Largest single part: 85 x 40 mm
Almost no supports: The only recommended support is on the wheel pins.
Snap together: Simply press the wheels on!
Resolution: 0.2 mm layerheight (0.1 mm for a better finish)
Infill: 5%
Supports: Yes, only needed on the wheel pins!
Brim: Not mandatory.
Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]
Feel free to share your makes with us on Instagram and tag us using @stllabs
(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
STLLabs
