3/8 Socket Set Holder

This was made to hold an assortment of Craftsman 3/8ths sockets with the tallest being 27mm tall (18mm 6 point socket). The sockets are held in by a flip-top that also packs underneath when using the rail. It stays in place with friction from the sockets and the pivot points. The handle is designed to bend when moving it out of the way. When closed, you can shake this to your heart's content and the sockets will stay. 

The included project file has all of the parts arranged and oriented. If you open as a project, it has the required custom supports and a brim for the handle.

0.2mm layers in your favorite filament type. Requires M3x10 bolts qty 2 and M3 nuts qty 2. 

During assembly, make sure the pivots are oriented with the bolt hole on the lower edge (facing downwards).

If you want a custom size, leave a comment. List the inner length, largest socket diameter, smallest socket diameter, and tallest socket height. It might be fun to convert this to a parametric OpenSCAD model…