Unifi U7 Pro XGS / XG compatible horizontal wall mount

There are 4 new screw holes, specifically for the U7 Pro XGS / XG. A sleeve was added to access the recessed screw hole. I use M3 bolts + nuts to attach the base plate to the wall mount arm. See pictures.There are 4 new screw holes, specifically for the U7 Pro XGS / XG. A sleeve was added to access the recessed screw hole. I use M3 bolts + nuts to attach the base plate to the wall mount arm. See pictures.

Print with 0.2mm layer height and 50% infill. PETG is preferred over PLA, since these APs are both heavy and run hot.