ThermoCam_V3 with improved resolution

Improved the resolution of 8x8 pixles by using the better Sensor MLX90640 with 32x24 pixels. Modified TC_front and TC_sensor-plate for use with both sensor types and added a fitting decoration for the new sensor.
The firmware and schematics for the new sensor are available on github too. 

Print Settings

Printer:

FIashForge Dreamer

Rafts: 

No

Supports:

No

Resolution: 

0.2 (0.1 for buttons)

Infill:

100%

Notes:

All parts are printable without support. Take care of a good layer adhesion to prevent the stands from breake on screwing.
Set for the first layer of Front and Back only one perimeter shell for a readable text and a better look. Don't smash the first layer to tight to the printplate to keep the gaps of the letters open.

I made the case out of PLA. It has the best properties to make the snap-in-mechanism of the front plate working. Here is a good layer adhesion essential too.

The Deko-Model ist not really necessary for the function but makes the camera looking authentic and protects the thermosensors surface. Fix it with some drops super glue.

Category: Electronics