February 27, 2022
Description
This is a bar-style wall mount hanger. Check out that beautiful STL file. The circles on the basket are what this slides into. I recommend drilling out two holes somewhere between the two circular parts; I didn't do this as part of the STL in case someone actually needed to hit a stud and my hole alignment wasn't part of the plan.
Honestly, I just used two drywall screws after drilling a small hole for it to go through; The screw still clears the basket no problem.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Filament: Generic PLA Black
Notes:
You -might- use supports if you're worried about it falling over during the print; I didn't have an issue.
I did 30% infill. You can likely get away with less, or do more; These baskets weren't very heavy -- so use your own best judgement. :)License:
Creative Commons — Attribution — Noncommercial
jackharvest
