September 8, 2025
Description
A simple mounting plate to screw on top of the valve cover to allow a fixed position of a wasted spark coilpack from aftermarket or OEM packs.
Features the mounting holes fitting the 032 905 106B coilpack, or wasted park pack with built in igniter.
Functions as is, but noticed the bolt holes for the coil pack was a bit too tight, and would need a slight increase in distance between each other.
Bolt hole pattern on the valve cover was fine as is, need to do a cut out for the back side to clear the distributor plate, if left on.
The bolts are M6 for the valve cover bolt studs. I used m6 hex nuts with a length of 30mm.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
P--JawZ--K
