February 27, 2022
Description
Mystikal's design is perfect. I simply must be buying my filament from Dr Doofenshmirtz, cause my spool holes on these AMZ3D spools are SMALLER than most of the ones I've used.
So, without further ado, here's the Remix of Mystikal's awesome model that changes the size of the Spool holder to accomodate to the less-than-manly 30mm diameter-hole that dishonors my family, dishonors my cows, and dishonors my spiritual ancestors.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2 ~ .4
Infill:
25%
Filament: AMZ3D PLA RED, WHITE, GREY, BLACK
Notes:
Printed at 204c / 60c Bed on Ender 3. I also printed one at 110% speed and it turned out just fine. I wouldn't recommend anything higher than .4 resolution, cause it gets more "staircase" like on the layers - which doesn't help very much for letting your filament "roll" off the spool while wall mounted. :)
The one pictured is printed at .4, without my settings dialed in very well. So, turned out fine despite my inadequacies! :)License:
Creative Commons — Attribution — Noncommercial
7
jackharvest
